Phase One P+ Series Uživatelský manuál

Roskildevej 39DK-2000 FrederiksbergDenmarkTel: +45 36 46 01 11Fax: +45 36 46 02 22e-mail: [email protected]2

 The suitcase contains small compartments for all the necessary parts; CF cards, CCD Cleaning Kit,

P 45+P 25+P 30+P 21+ P 20+CCD:Full frame CCD (on 645 cameras)Less than full frame CCD (on 645 cameras)Lens factor:1.1 1.1

P 45+ P 25+P 30+P 21+ P 20+CCD: Full frame CCD (on 645 cameras)Less than full frame CCD (on 645 cameras)Lens factor:1.11.



When the system is unpacked the first thing to do, is to give the batteries a full charge.In the Va

The Phase One P+ back comes with two 2500mAh batteries. If you need to purchase extra batteries

 The Phase One P+ back is designed specifically to fit on one of several br

When operating in a studio, where connected to a computer via FireWire you are not dependent on battery power or

For more information on capturing tethered with the Phase One Capture One application please consult the online user guide

When capturing an image the green LED is blinking rapidly to indicates that the P+ back is busy.Steady green lig

Capture One Application (Please see the section specific for your camera body for more information on what latency setting



The name Phase One is a trademark of Phase One A/S.The names Mamiya, Hasselblad, Contax, Adobe, Apple, Mac OS X and W

 Charge the batteries (Described earlier)Install the focusi

The camera back’s date and time is set according to European time (since Phase One’s production f

 When working with CF-cards, card readers and digital cameras it is very important to follow a few rules,

 The Phase One Secure Storage system (3S) provides the industriy’s safest memory card handling

Ejecting the card while the P+ back is still writing to the card (red LED is on) will cause images, that are

On Windows XP and Windows 2000:To avoid confusing the system or, worst case, end up with a CF-car

On Mac OS X the formatting cannot be done directly in the finder but is easily done insi

Insert the CF-card in the card reader, and select the drive when it mounts in "My co

 When the P+ back is turned on, the screen will always be in its home display position or &

Inside the menu system arrows will indicate the function of the four buttons, the two buttons to the left are used to ente

When the display is in its home position the two buttons to the left, ISO and WB brings you directly to the ISO

When a FireWire cable is inserted and the P+ Back draws the power from FireWire this is shown with an icon in the bottom o

 "Play mode" can be used to review, zoom and delete images.From the "Main screen", pressi

Play mode has four view modes, or review modes; Normal image display, Exposure warning overlay, Histogram overl

The zoom has four amounts, Normal, enlargement 1, enlargement 2 and enlargement 3.When zoomed into enlargement 1, 2 or 3 t

Navigate to the delete function by pressing the play button.When in the delete view press the Up and Down buttons t

 Pressing the lower left button sets the P+ back in "Menu mode"Entering Menu mode by pressing the lo

Shutter refers to the shutter of the camera the P+ back resides on.Due to the sleeping architecture of the P+ back

In "FileFormat" you can select two options "IIQ Raw L" and "IIQ Raw S"."IIQ

Or if you regret the choice and just want to go back to the previous setting (the one with the little dot), select the &qu

    Charging the batteries 12  Syste

When one of the options is selected the “Make Custom WB” will be blinking.Now you are ready to capture the image that shou

This technique is useful because you can bring up to three predefined custom white balances taken in the studio to your lo

The second option in "Play Setup" is "Auto Preview". "Auto Preview" refers to t

In the Brighness setup, you can set the brightnes of the preview LCD screenDefault setting is Bright.Only the B

Scrolling past the last menu entry will reveal the next entry. Now the arrow in the top right side will turn into a double

Power source only has two options, “Autodetect” or “Battery”.In Autodetect, the P+ back will detect if an IEE

Disk Checking is done per default on every card inserted to the P+ back.If for some reason this check is not

"Ready beep" is the small beep that sounds from the camera after a capture is taken.The "Ready b

The "Language" option in the "Configuration" Menu can be used to select preferred language of

 The "About" option in the "Setup Menu" displays technical information ab

Formatting on a Windows computer 27Disabling iPhoto Autostart (Mac OS X) 27  Menu button

 The functionality of the P+ back is well integrated with the Mamiya 645AFD camera. The P+ bac

To release the battery press the battery release button and slide the battery down and out of the compartment.Power button

The P+ back is fully integrated with the camera body and acts as a part of the w

The image area of the Mamiya 645AFD is approximately 5,6 cm x 4.2 cm. The image area of the P+

The CCD in P+ back is positioned in landscape orientation. Whenever an image is captured in portrait pos

T-mode is not supported for digital backs on the Mamiya 645 AFD. This is usually not a problem

The P+ back for Mamiya 645 AFD also supports the Mamiya RZ67 PRO IID via the 645 AFD adaptor plate ava

When using the P+ back on a Mamiya RZ67 PRO IID, the flash sync should be connecte

Cables shipping with P+ back for Mamiya 645 AFD (Value added purchase only)The P+ backs for Mamiya 645 AFD is shipping wit



Time & Date 49Language 49  Mounting the P+ back on the Mamiya 645AFD 54Mounting the Vi

 The Phase One P+ back can be mounted on a wide range of Hasselblad cameras including Hasselb

The image area of the Hasselblad camera body is approximately 6 cm x 6 cm, whereas the image a

The P+ back is fully integrated with the camera body and acts as a true part of the whole camera syst

The P+ back can be rotated to the left and mounted vertically on the Hasselblad body for u

Regardless of which Hasselblad V type camera used, a sync cable is always connected from the lens to

When using the Phase One P+ back with a Hasselblad 555 ELD, the shutter release on the front of the Has

When using the P+ back on some Hasselblad motorized bodies (i.e. Hasselblad ELX or Hasselblad ELM seri

The Phase One P+ back also supports mechanical Hasselblad cameras such as the

Please note that the Phase One P+ back should not be mounted while the camera is set to m

Phase One offers an optional P+ back adaptor plate with Hasselblad mount that enables mounting

 Auto exposure 82Double exposure protection 83Image orientation detection 83IR filter on t

Mirror up operation is only recommended if using Mamiya’s own double cable release.The adaptor plate connects to the Mamiy

The P+ backs for Hasselblad V is shipping with th

The Phase One H 101 - P+ back is a single shot digital camera back designed spcifically for the innov

The Hasselblad H1 incorporates a display which displays information of the actual condition of the came

The icon on the second position from the right shows the actual captures left on the storage media,

The H 101 - P+ back CCD is positioned in landscape orientation. Whenever an image is captured

The image area of the Hasselblad H1 is approximately 60 x 45 mm. The image area of the H 101 -

The H 101 - P+ back integrates fully with the H1 camera house and acts

No cables are required between the H 101 - P+ back and the Hasselblad H1 .Flash sync cable must be connected

Cabling Cables shipping with H101 – P+ backs (Value Added purchase only)The P+ backs for Hasselblad H1/H2 is shipping with

 Thank you for choosing a Phase One P+ Series digital camera back solution.The Phase One P+ Series, provides

The CONTAX 645 utilizes a TTL phase difference detection type auto focus system. Furthermore th

With the P+ back for Contax it is not possible to accidently double expose the image by capturi

It is only possible to remount the filter without dust in between the filter and the CCD if you have access to special cle

The P+ back for Contax is fully integrated with the camera house and acts as a true

No cables are required between the P+ back and the CONTAX 645. Flash sync cable must be connected t

The supplied release cable must be connected between the multiple pin connecto

Because the CCD element reflects light different than film, and this cannot be communicated to the Contax.Using T



The Phase One P+ back can be used on most large format cameras via the optional Phase One Fl

The Phase One FlexAdaptor  On a Phase One FlexAdaptor the P+ back can be used with both Long and

 Lens cast may occur if using the camera back with wide- angle lenses e.g. Horseman Digifl

plate in front of the lens and capturing a calibration image that you then apply to all of your capture files you are able

When using LCC in combination with large format capture and image stitching you mus

PLEASE NOTE: As soon as grey calibration is done and the calibration files are saved and appear in the Lens CC drop-down b

 Hold the calibration plate in front of the fixed lens (as close as possible), and capt

Start by capturing the two calibration files and the two image files.Save the l

When the Phase One P+ back is not attached to a camera, the camera back must be protected



When a card is inserted into the P–back, a comple

It is not recommended to turn off disk checking, but it is possible by selecting the “Disk Checking” available in the “Men